]> git.meshlink.io Git - meshlink/blobdiff - doc/tincd.8.in
Remove files not used by MeshLink.
[meshlink] / doc / tincd.8.in
diff --git a/doc/tincd.8.in b/doc/tincd.8.in
deleted file mode 100644 (file)
index 3c5886b..0000000
+++ /dev/null
@@ -1,207 +0,0 @@
-.Dd 2013-01-14
-.Dt TINCD 8
-.\" Manual page created by:
-.\" Ivo Timmermans
-.\" Guus Sliepen <guus@tinc-vpn.org>
-.Sh NAME
-.Nm tincd
-.Nd tinc VPN daemon
-.Sh SYNOPSIS
-.Nm
-.Op Fl cdDKnoLRU
-.Op Fl -config Ns = Ns Ar DIR
-.Op Fl -no-detach
-.Op Fl -debug Ns Op = Ns Ar LEVEL
-.Op Fl -net Ns = Ns Ar NETNAME
-.Op Fl -option Ns = Ns Ar [HOST.]KEY=VALUE
-.Op Fl -mlock
-.Op Fl -logfile Ns Op = Ns Ar FILE
-.Op Fl -bypass-security
-.Op Fl -chroot
-.Op Fl -user Ns = Ns Ar USER
-.Op Fl -help
-.Op Fl -version
-.Sh DESCRIPTION
-This is the daemon of tinc, a secure virtual private network (VPN) project.
-When started,
-.Nm
-will read it's configuration file to determine what virtual subnets it has to serve
-and to what other tinc daemons it should connect.
-It will connect to the ethertap or tun/tap device
-and set up a socket for incoming connections.
-Optionally a script will be executed to further configure the virtual device.
-If that succeeds,
-it will detach from the controlling terminal and continue in the background,
-accepting and setting up connections to other tinc daemons
-that are part of the virtual private network.
-Under Windows (not Cygwin) tinc will install itself as a service,
-which will be restarted automatically after reboots.
-.Sh OPTIONS
-.Bl -tag -width indent
-.It Fl c, -config Ns = Ns Ar DIR
-Read configuration files from
-.Ar DIR
-instead of
-.Pa @sysconfdir@/tinc/ .
-.It Fl D, -no-detach
-Don't fork and detach.
-This will also disable the automatic restart mechanism for fatal errors.
-If not mentioned otherwise, this will show log messages on the standard error output.
-.It Fl d, -debug Ns Op = Ns Ar LEVEL
-Increase debug level or set it to
-.Ar LEVEL
-(see below).
-.It Fl n, -net Ns = Ns Ar NETNAME
-Connect to net
-.Ar NETNAME .
-This will let tinc read all configuration files from
-.Pa @sysconfdir@/tinc/ Ar NETNAME .
-Specifying
-.Li .
-for
-.Ar NETNAME
-is the same as not specifying any
-.Ar NETNAME .
-.It Fl o, -option Ns = Ns Ar [HOST.]KEY=VALUE
-Without specifying a
-.Ar HOST ,
-this will set server configuration variable
-.Ar KEY 
-to
-.Ar VALUE .
-If specified as
-.Ar HOST.KEY=VALUE ,
-this will set the host configuration variable 
-.Ar KEY
-of the host named
-.Ar HOST
-to
-.Ar VALUE .
-This option can be used more than once to specify multiple configuration variables.
-.It Fl L, -mlock
-Lock tinc into main memory.
-This will prevent sensitive data like shared private keys to be written to the system swap files/partitions.
-This option is not supported on all platforms.
-.It Fl -logfile Ns Op = Ns Ar FILE
-Write log entries to a file instead of to the system logging facility.
-If
-.Ar FILE
-is omitted, the default is
-.Pa @localstatedir@/log/tinc. Ns Ar NETNAME Ns Pa .log.
-.It Fl -pidfile Ns = Ns Ar FILENAME
-Store a cookie in
-.Ar FILENAME
-which allows
-.Xr tinc 8
-to authenticate.
-If
-.Ar FILE
-is omitted, the default is
-.Pa @localstatedir@/run/tinc. Ns Ar NETNAME Ns Pa .pid.
-.It Fl -bypass-security
-Disables encryption and authentication of the meta protocol.
-Only useful for debugging.
-.It Fl R, -chroot
-With this option tinc chroots into the directory where network
-config is located (@sysconfdir@/tinc/NETNAME if -n option is used,
-or to the directory specified with -c option) after initialization.
-This option is not supported on all platforms.
-.It Fl U, -user Ns = Ns Ar USER
-setuid to the specified
-.Ar USER
-after initialization.
-This option is not supported on all platforms.
-.It Fl -help
-Display short list of options.
-.It Fl -version
-Output version information and exit.
-.El
-.Sh SIGNALS
-.Bl -tag -width indent
-.It ALRM
-Forces
-.Nm
-to try to connect to all uplinks immediately.
-Usually
-.Nm
-attempts to do this itself,
-but increases the time it waits between the attempts each time it failed,
-and if
-.Nm
-didn't succeed to connect to an uplink the first time after it started,
-it defaults to the maximum time of 15 minutes.
-.It HUP
-Partially rereads configuration files.
-Connections to hosts whose host config file are removed are closed.
-New outgoing connections specified in
-.Pa tinc.conf
-will be made.
-If the
-.Fl -logfile
-option is used, this will also close and reopen the log file,
-useful when log rotation is used.
-.El
-.Sh DEBUG LEVELS
-The tinc daemon can send a lot of messages to the syslog.
-The higher the debug level,
-the more messages it will log.
-Each level inherits all messages of the previous level:
-.Bl -tag -width indent
-.It 0
-This will log a message indicating
-.Nm
-has started along with a version number.
-It will also log any serious error.
-.It 1
-This will log all connections that are made with other tinc daemons.
-.It 2
-This will log status and error messages from scripts and other tinc daemons.
-.It 3
-This will log all requests that are exchanged with other tinc daemons. These include
-authentication, key exchange and connection list updates.
-.It 4
-This will log a copy of everything received on the meta socket.
-.It 5
-This will log all network traffic over the virtual private network.
-.El
-.Sh FILES
-.Bl -tag -width indent
-.It Pa @sysconfdir@/tinc/
-Directory containing the configuration files tinc uses.
-For more information, see
-.Xr tinc.conf 5 .
-.It Pa @localstatedir@/run/tinc. Ns Ar NETNAME Ns Pa .pid
-The PID of the currently running
-.Nm
-is stored in this file.
-.El
-.Sh BUGS
-The
-.Va BindToInterface
-option may not work correctly.
-.Pp
-.Sy The cryptography in tinc is not well tested yet. Use it at your own risk!
-.Pp
-If you find any bugs, report them to tinc@tinc-vpn.org.
-.Sh TODO
-A lot, especially security auditing.
-.Sh SEE ALSO
-.Xr tinc 8 ,
-.Xr tinc.conf 5 ,
-.Pa http://www.tinc-vpn.org/ ,
-.Pa http://www.cabal.org/ .
-.Pp
-The full documentation for tinc is maintained as a Texinfo manual.
-If the info and tinc programs are properly installed at your site,
-the command
-.Ic info tinc
-should give you access to the complete manual.
-.Pp
-tinc comes with ABSOLUTELY NO WARRANTY.
-This is free software, and you are welcome to redistribute it under certain conditions;
-see the file COPYING for details.
-.Sh AUTHORS
-.An "Ivo Timmermans"
-.An "Guus Sliepen" Aq guus@tinc-vpn.org
-.Pp
-And thanks to many others for their contributions to tinc!