*/
typedef void (*receive_cb_t)(mesh *mesh, node *source, const void *data, size_t len);
+/// A callback reporting the meta-connection attempt made by the host node to an another node.
+/** @param mesh A handle which represents an instance of MeshLink.
+ * @param node A pointer to a meshlink_node_t describing the node to whom meta-connection is being tried.
+ * This pointer is valid until meshlink_close() is called.
+ */
+typedef void (*connection_try_cb_t)(mesh *mesh, node *node);
+
/// A callback reporting node status changes.
/** @param mesh A handle which represents an instance of MeshLink.
* @param node A pointer to a meshlink::node describing the node whose status changed.
*/
typedef void (*channel_poll_cb_t)(mesh *mesh, channel *channel, size_t len);
+/// A callback for cleaning up buffers submitted for asynchronous I/O.
+/** This callbacks signals that MeshLink has finished using this buffer.
+ * The ownership of the buffer is now back into the application's hands.
+ *
+ * @param mesh A handle which represents an instance of MeshLink.
+ * @param channel A handle for the channel which used this buffer.
+ * @param data A pointer to a buffer containing the enqueued data.
+ * @param len The length of the buffer.
+ * @param priv A private pointer which was set by the application when submitting the buffer.
+ */
+typedef void (*aio_cb_t)(mesh *mesh, channel *channel, const void *data, size_t len, void *priv);
+
/// A class describing a MeshLink node.
class node: public meshlink_node_t {
};
static const uint32_t ORDERED = MESHLINK_CHANNEL_ORDERED;
static const uint32_t FRAMED = MESHLINK_CHANNEL_FRAMED;
static const uint32_t DROP_LATE = MESHLINK_CHANNEL_DROP_LATE;
+ static const uint32_t NO_PARTIAL = MESHLINK_CHANNEL_NO_PARTIAL;
static const uint32_t TCP = MESHLINK_CHANNEL_TCP;
static const uint32_t UDP = MESHLINK_CHANNEL_UDP;
};
(void)message;
}
+ /// This functions is called whenever MeshLink a meta-connection attempt is made.
+ virtual void connection_try(node *peer) {
+ /* do nothing */
+ (void)peer;
+ }
+
/// This functions is called whenever another node attempts to open a channel to the local node.
/**
* If the channel is accepted, the poll_callback will be set to channel_poll and can be
meshlink_set_node_duplicate_cb(handle, &node_duplicate_trampoline);
meshlink_set_log_cb(handle, MESHLINK_DEBUG, &log_trampoline);
meshlink_set_channel_accept_cb(handle, &channel_accept_trampoline);
+ meshlink_set_connection_try_cb(handle, &connection_try_trampoline);
return meshlink_start(handle);
}
* If the port is set to 0, then MeshLink will listen on a port
* that is randomly assigned by the operating system every time open() is called.
*
- * @return This function returns true if the port was successfully changed, false otherwise.
+ * @return This function returns true if the port was successfully changed
+ * to the desired port, false otherwise. If it returns false, there
+ * is no guarantee that MeshLink is listening on the old port.
*/
bool set_port(int port) {
return meshlink_set_port(handle, port);
meshlink_set_channel_poll_cb(handle, channel, (meshlink_channel_poll_cb_t)cb);
}
+ /// Set the send buffer size of a channel.
+ /** This function sets the desired size of the send buffer.
+ * The default size is 128 kB.
+ *
+ * @param channel A handle for the channel.
+ * @param size The desired size for the send buffer.
+ * If a NULL pointer is given, the callback will be disabled.
+ */
+ void set_channel_sndbuf(channel *channel, size_t size) {
+ meshlink_set_channel_sndbuf(handle, channel, size);
+ }
+
+ /// Set the receive buffer size of a channel.
+ /** This function sets the desired size of the receive buffer.
+ * The default size is 128 kB.
+ *
+ * @param channel A handle for the channel.
+ * @param size The desired size for the send buffer.
+ * If a NULL pointer is given, the callback will be disabled.
+ */
+ void set_channel_rcvbuf(channel *channel, size_t size) {
+ meshlink_set_channel_rcvbuf(handle, channel, size);
+ }
+
/// Open a reliable stream channel to another node.
/** This function is called whenever a remote node wants to open a channel to the local node.
* The application then has to decide whether to accept or reject this channel.
* @param len The length of the data.
*
* @return The amount of data that was queued, which can be less than len, or a negative value in case of an error.
+ * If MESHLINK_CHANNEL_NO_PARTIAL is set, then the result will either be len,
+ * 0 if the buffer is currently too full, or -1 if len is too big even for an empty buffer.
*/
ssize_t channel_send(channel *channel, void *data, size_t len) {
return meshlink_channel_send(handle, channel, data, len);
}
+ /// Transmit data on a channel asynchronously
+ /** This registers a buffer that will be used to send data to the remote node.
+ * Multiple buffers can be registered, in which case data will be sent in the order the buffers were registered.
+ * While there are still buffers with unsent data, the poll callback will not be called.
+ *
+ * @param channel A handle for the channel.
+ * @param data A pointer to a buffer containing data sent by the source, or NULL if there is no data to send.
+ * After meshlink_channel_aio_send() returns, the buffer may not be modified or freed by the application
+ * until the callback routine is called.
+ * @param len The length of the data, or 0 if there is no data to send.
+ * @param cb A pointer to the function which will be called when MeshLink has finished using the buffer.
+ *
+ * @return True if the buffer was enqueued, false otherwise.
+ */
+ bool channel_aio_send(channel *channel, const void *data, size_t len, meshlink_aio_cb_t cb, void *priv) {
+ return meshlink_channel_aio_send(handle, channel, data, len, cb, priv);
+ }
+
+ /// Receive data on a channel asynchronously
+ /** This registers a buffer that will be filled with incoming channel data.
+ * Multiple buffers can be registered, in which case data will be received in the order the buffers were registered.
+ * While there are still buffers that have not been filled, the receive callback will not be called.
+ *
+ * @param channel A handle for the channel.
+ * @param data A pointer to a buffer that will be filled with incoming data.
+ * After meshlink_channel_aio_receive() returns, the buffer may not be modified or freed by the application
+ * until the callback routine is called.
+ * @param len The length of the data.
+ * @param cb A pointer to the function which will be called when MeshLink has finished using the buffer.
+ *
+ * @return True if the buffer was enqueued, false otherwise.
+ */
+ bool channel_aio_receive(channel *channel, const void *data, size_t len, meshlink_aio_cb_t cb, void *priv) {
+ return meshlink_channel_aio_receive(handle, channel, data, len, cb, priv);
+ }
+
/// Get the amount of bytes in the send buffer.
/** This returns the amount of bytes in the send buffer.
* These bytes have not been received by the peer yet.
that->log(level, message);
}
+ static void connection_try_trampoline(meshlink_handle_t *handle, meshlink_node_t *peer) {
+ if(!(handle->priv)) {
+ return;
+ }
+
+ meshlink::mesh *that = static_cast<mesh *>(handle->priv);
+ that->connection_try(static_cast<node *>(peer));
+ }
+
static bool channel_accept_trampoline(meshlink_handle_t *handle, meshlink_channel *channel, uint16_t port, const void *data, size_t len) {
if(!(handle->priv)) {
return false;