+will be stored in /etc/tinc/fubar/passphrases/192.168.2.0 (note the 0).
+\f
+Running the daemon
+------------------
+If you use a package manager to install Tinc, the startup scripts use a file
+called /etc/tinc/nets.boot to see which umbrella's exist. It has a line
+per VPN, and lines starting with a # are ignored. Ours will contain:
+
+ # Example VPN from the HOWTO
+ fubar
+
+In Debian, /etc/init.d/tinc start will start the daemons.
+
+If you use Doohickey Linux just like we do, you'll have to edit the systems
+startup scripts by hand. It should contain something along the lines of:
+
+ insmod ethertap -s --name=tap0 unit=0
+ ifconfig tap0 hw ether fe:fd:c0:a8:01:01
+ ifconfig tap0 192.168.1.1 netmask 255.255.0.0 broadcast 192.168.255.255 -arp
+
+There are two things to note here! First, the MAC address of the ethertap
+device is very important. It must start with fe:fd, and end in the
+hexadecimal representation of the VPN IP number.
+Second, the netmask of the tap device is set to that of the umbrella!