From: Ivo Timmermans Date: Fri, 26 May 2000 11:25:59 +0000 (+0000) Subject: Updated by Lubomir Bulej and Mads Kiilerich: it uses /etc/tinc/nets.boot and the... X-Git-Tag: import-tinc-1.1~880 X-Git-Url: https://git.meshlink.io/?a=commitdiff_plain;h=85e3c1f2716c622ca8cada83d833703bf8a3ecc6;p=meshlink Updated by Lubomir Bulej and Mads Kiilerich: it uses /etc/tinc/nets.boot and the VpnMask directive in the config files. --- diff --git a/redhat/tinc b/redhat/tinc index 704d5a25..e9f3b410 100644 --- a/redhat/tinc +++ b/redhat/tinc @@ -4,13 +4,13 @@ # # chkconfig: 2345 46 54 # -# version: 1.0.4 -# author: Lubomir Bulej -# Modified for RPM by Mads Kiilerich +# version: 1.0.8 +# authors: Lubomir Bulej +# Mads Kiilerich # -# description: this script takes care of starting and setting up of VPNs \ -# provided by tincd daemon. It parses the configuration files \ -# in all VPN directories and sets up the interfaces and routing +# description: This script parses tinc configuration files for networks given \ +# in /etc/tinc/nets.boot and for each of the networks it sets up \ +# the interface and static routes and starts the tinc daemon. # # processname: tincd @@ -31,24 +31,84 @@ TCONF=/etc/tinc TPIDS=/var/run #DEBUG=-dddd +NETSFILE=$TCONF/nets.boot + # Check the daemon if [ ! -x $TINCD ]; then - echo "**tinc: daemon $TINCD does not exist or is not executable!" + echo "**tinc: $TINCD does not exist or is not executable!" >&2 exit fi # Check if ip-route is installed if [ ! -f /sbin/ip ]; then - echo "**tinc: ip-route utilities not installed!" + echo "**tinc: ip-route utilities not installed!" >&2 + exit +fi + +# Check the kernel +if ! ip addr &> /dev/null; then + echo "**tinc: kernel not configured for use with ip-route!" >&2 exit fi # Check the configuration directory if [ ! -d $TCONF ]; then - echo "**tinc: configuration directory ($TCONF) not found!" + echo "**tinc: configuration directory ($TCONF) not found!" >&2 exit fi - + +# Check nets.boot +if [ ! -f $NETSFILE ]; then + echo "**tinc: file with list of VPNs to start ($NETSFILE) not found!" >&2 + exit +fi + +# Load names of networks to be started +NETS="$(sed -e 's/#.*//; s/[[:space:]]//g; /^$/ d' $NETSFILE)" + + +############################################################################## +# prefix_to_mask Converts prefix length to netmask +# eg. 17 -> 255.255.128.0 +# $1 ... prefix + +prefix_to_mask () { + _MSK=""; _len="$1" + for _dot in "." "." "." " "; do + if [ ${_len} -ge 8 ]; then + _fld=8 + else + _fld="${_len}" + fi + + _MSK="${_MSK}$((255 & (255 << (8 - _fld))))${_dot}" + _len=$((_len - _fld)) + done + + echo ${_MSK} +} + + +############################################################################## +# mask_to_prefix Converts netmask to prefix length +# eg. 255.255.192.0 -> 18 +# $1 ... netmask + +mask_to_prefix () { + _LEN=0; _msk="$1" + for _tmp in 1 2 3 4; do + _fld=${_msk%%.*} + _msk=${_msk#*.} + + while [ ${_fld} -ne 0 ]; do + _fld=$(((_fld << 1) & 255)) + _LEN=$((_LEN + 1)) + done + done + + echo ${_LEN} +} + ############################################################################## # vpn_load () Loads VPN configuration @@ -57,56 +117,76 @@ fi vpn_load () { CFG="$TCONF/$1/tinc.conf" - [ -f $CFG ] || { echo "**tinc: $CFG does not exist!" >&2; return 1; } + [ -f $CFG ] || { MSG="$CFG does not exist!"; return 1 } # load TINCD config - DEV=`grep -i -e '^[[:space:]]*TapDevice' $CFG | sed 's/[[:space:]]//g; s/^.*=//g'` - VPN=`grep -i -e '^[[:space:]]*(MyOwnVPNIP|MyVirtualIP)' -E $CFG | head -1 | sed 's/[[:space:]]//g; s/^.*=//g'` + DEV="$(grep -i -e '^[[:space:]]*TapDevice' $CFG | sed 's/[[:space:]]//g; s/^.*=//g')" + VPN="$(grep -i -e '^[[:space:]]*(MyOwnVPNIP|MyVirtualIP)' -E $CFG | sed 's/[[:space:]]//g; s/^.*=//g')" + IFM="$(grep -i -e '^[[:space:]]*VPNMask' $CFG | sed 's/[[:space:]]//g; s/^.*=//g')" - # discourage empty and multiple entries + # TapDevice syntax validation [ -z "$DEV" ] && \ - { echo "**tinc: TapDevice required!" >&2; return 2; } - echo $DEV | grep -q '^/dev/tap' || - { echo "**tinc: TapDevice should be in form /dev/tapX" >&2; return 2; } - [ `echo $DEV | wc -l` -gt 1 ] && \ - { echo "**tinc: multiple TapDevice entries not allowed!" >&2; return 3; } + { MSG="TapDevice required!"; return 1 } + [ $(echo $DEV | wc -l) -gt 1 ] && \ + { MSG="multiple TapDevice entries not allowed!"; return 1 } + echo $DEV | grep -q -x -E '/dev/tap[[:digit:]]+' || + { MSG="TapDevice should be in form /dev/tapX!"; return 1 } + + # MyOwnVPNIP/MyVirtualIP syntax validation [ -z "$VPN" ] && \ - { echo "**tinc: MyOwnVPNIP/MyVirtualIP required!" >&2; return 2; } - [ `echo $VPN | wc -l` -gt 1 ] && \ - { echo "**tinc: multiple MyOwnVPNIP/MyVirtualIP entries not allowed!" >&2; return 3; } - echo $VPN | grep -q -x \ - '\([[:digit:]]\{1,3\}\.\)\{3\}[[:digit:]]\{1,3\}/[[:digit:]]\{1,2\}' || \ - { echo "**tinc: badly formed MyOwnVPNIP/MyVirtualIP address $VPN!"; return 3; } + { MSG="MyOwnVPNIP/MyVirtualIP required!"; return 1 } + [ $(echo $VPN | wc -l) -gt 1 ] && \ + { MSG="multiple MyOwnVPNIP/MyVirtualIP entries not allowed!"; return 1 } + echo $VPN | grep -q -x -E \ + '([[:digit:]]{1,3}\.){3}[[:digit:]]{1,3}/[[:digit:]]{1,2}' || \ + { MSG="badly formed MyOwnVPNIP/MyVirtualIP address $VPN!"; return 1 } + + # VPNMask syntax validation + [ $(echo $IFM | wc -l) -gt 1 ] && \ + { MSG="multiple VPNMask entries not allowed!"; return 1 } + + + # device & IP address extraction + TAP=${DEV##*/} + NUM=${TAP#tap} + ADR=${VPN%%/*} + + # netmask is calculated from MyVirtualIP netmask prefix length, except when + # VPNMask is specified, in which case it is used instead of default prefix + + # VPNMask not specified + if [ -z "$IFM" ]; then + LEN=${VPN##*/} + MSK=$(prefix_to_mask $LEN) + + # VPNMask is prefix length, convert it to netmask for MSK + elif echo $IFM | grep -q -x -E '[[:digit:]]{1,2}'; then + VPN="$ADR/$IFM" + MSK=$(prefix_to_mask $IFM) + + # VPNMask is netmask, convert it to prefix length for VPN + elif echo $IFM | grep -q -x -E '([[:digit:]]{1,3}\.){3}[[:digit:]]{1,3}'; then + VPN="$ADR/$(mask_to_prefix $IFM)" + MSK="$IFM" + + else + MSG="badly formed interface netmask (VPNMask=$IFM)!" + return 1 + fi - # network device - TAP=`echo $DEV | cut -d"/" -f3` - NUM=`echo $TAP | sed 's/tap//'` - - # IP address, netmask length - ADR=`echo $VPN | cut -d"/" -f1` - LEN=`echo $VPN | cut -d"/" -f2` - - # Expand bitlength to netmask - MSK=""; len=$LEN - for cnt in 1 1 1 0; do - if [ $len -ge 8 ]; then - msk=8 - else - msk=$len - fi - - MSK="$MSK$((255 & (255 << (8 - msk))))" - [ $cnt -ne 0 ] && MSK="$MSK." - len=$((len-msk)) - done # Network & broadcast addresses - BRD=`ipcalc --broadcast $ADR $MSK | cut -d"=" -f2` - NET=`ipcalc --network $ADR $MSK | cut -d"=" -f2` - + BRD=$(ipcalc --broadcast $ADR $MSK | cut -d"=" -f2) + NET=$(ipcalc --network $ADR $MSK | cut -d"=" -f2) + # MAC address - MAC=`printf "fe:fd:%0.2x:%0.2x:%0.2x:%0.2x" $(echo $ADR | sed 's/\./ /g')` - # echo "TAP $TAP NUM $NUM ADR $ADR LEN $LEN MSK $MSK BRD $BRD NET $NET MAC $MAC" >&2 + MAC=$(printf "fe:fd:%0.2x:%0.2x:%0.2x:%0.2x" $(echo $ADR | { IFS=. ; read a b c d; echo $a $b $c $d })) + + # debugging + # echo >&2 + # echo "VPN $VPN TAP $TAP NUM $NUM MAC $MAC IFM $IFM" >&2 + # echo "ADR $ADR MSK $MSK NET $NET BRD $BRD" >&2 + return 0 } @@ -117,8 +197,8 @@ vpn_load () { # $1 ... VPN to start vpn_start () { - - vpn_load $1 || { echo "**tinc: could not vpn_load $1" >&2; return 1; } + MSG=""; ERR="" + vpn_load $1 || return 1 # create device file if [ ! -c $DEV ]; then @@ -127,24 +207,24 @@ vpn_start () { fi # load device module - { insmod ethertap --name="ethertap$NUM" unit="$NUM" 2>&1 || \ - { echo "**tinc: cannot insmod ethertap$NUM" >&2; return 2; } - } | grep -v '^Us' + ERR="$(insmod ethertap -o "ethertap$NUM" unit="$NUM" 2>&1 1> /dev/null)" || + { MSG="could not insmod ethertap as unit $NUM!"; return 2 } # configure the interface - ip link set $TAP address $MAC - ip link set $TAP up - ip addr flush dev $TAP 2>&1 | grep -v -x '^Nothing to flush.' - ip addr add $VPN brd $BRD dev $TAP + ERR="$(ip link set $TAP address $MAC 2>&1)" || + { MSG="could not set address for device $TAP!"; return 3 } + + ERR="$(ip link set $TAP up 2>&1)" || + { MSG="could not bring up device $TAP!"; return 3 } + + ERR="$(ip addr add $VPN brd $BRD dev $TAP 2>&1)" || + { MSG="could not set IP address for device $TAP!"; return 3 } # start tincd $TINCD --net="$1" $DEBUG || \ - { echo "**tinc: could not start $TINCD" >&2; return 3; } - - # default interface route - # ip route add $NET/$LEN dev $TAP + { MSG="could not start daemon for network $1"; return 3 } - # setup routes + # setup custom static routes /etc/sysconfig/network-scripts/ifup-routes $TAP return 0 @@ -157,12 +237,9 @@ vpn_start () { # $1 ... VPN to stop vpn_stop () { - + MSG=""; ERR="" vpn_load $1 || return 1 - # flush the routing table - # ip route flush dev $TAP &> /dev/null - # kill the tincd daemon PID="$TPIDS/tinc.$1.pid" if [ -f $PID ]; then @@ -173,14 +250,16 @@ vpn_stop () { dly=0 while [ $dly -le 5 ]; do [ -f $PID ] || break - sleep 1; dly=$((dly+1)) + sleep 1; dly=$((dly + 1)) done fi + # remove stale PID file [ -f $PID ] && rm -f $PID fi # bring the interface down + ip addr flush dev $TAP &> /dev/null ip link set $TAP down &> /dev/null # remove ethertap module @@ -190,21 +269,44 @@ vpn_stop () { } # vpn_stop +# Check if there is anything to start +if [ ! -z "$1" -a "$1" != "status" -a -z "$NETS" ]; then + echo "**tinc: no networks found in $NETSFILE!" >&2 + exit +fi + + # See how we were called. case "$1" in start) - for vpn in `ls -1 $TCONF`; do - echo -n "Bringing up VPN $vpn: " - vpn_start $vpn && action "" /bin/true + for vpn in $NETS; do + echo -n "Bringing up TINC network $vpn: " + vpn_start $vpn && \ + success "startup of network $vpn" || \ + failure "startup of network $vpn" + echo + + if [ ! -z "$MSG" ]; then + [ ! -z "$ERR" ] && echo "$ERR" >&2 + echo "**tinc: $MSG" >&2 + fi done touch /var/lock/subsys/tinc ;; stop) - for vpn in `ls -1 $TCONF`; do - echo -n "Shutting down VPN $vpn: " - vpn_stop $vpn && action "" /bin/true + for vpn in $NETS; do + echo -n "Shutting down TINC network $vpn: " + vpn_stop $vpn && \ + success "shutdown of network $vpn" || \ + failure "shutdown of network $vpn" + echo + + if [ ! -z "$MSG" ]; then + [ ! -z "$ERR" ] && echo "$ERR" >&2 + echo "**tinc: $MSG" >&2 + fi done rm -f /var/lock/subsys/tinc @@ -212,15 +314,12 @@ case "$1" in status) echo -n "Configured VPNs: " - for vpn in `ls -1 $TCONF`; do + for vpn in $NETS; do PID="$TPIDS/tinc.$vpn.pid" - echo -n "$vpn:" - if [ -f $PID -a `ps ax | grep "^ *$(cat $PID)" | wc -l` -eq 1 ] - then - echo -n "OK " - else - echo -n "DEAD " - fi + + [ -f $PID ] && PID="$(cat $PID)" || PID="-dead-" + ps ax | grep "^[[:space:]]*$PID" && STS="OK" || STS="DEAD" + echo -n "$vpn:$STS " done echo ;;