if test "x$ENABLE_DBUS" = "xyes"; then
PKG_CHECK_MODULES(DBUS, [ dbus-glib-1 >= 0.23])
+
+ AC_ARG_WITH(dbus-sys, [ --with-dbus-sys=<dir> where D-BUS system.d directory is])
+
+ if ! test -z "$with_dbus_sys" ; then
+ DBUS_SYS_DIR="$with_dbus_sys"
+ else
+ DBUS_SYS_DIR="${sysconfdir}/dbus-1/system.d"
+ fi
+ AC_SUBST(DBUS_SYS_DIR)
+ AC_DEFINE_UNQUOTED(DBUS_SYSTEMD_DIR, "$DBUS_SYS_DIR", [Where system.d dir for DBUS is])
+
+ if pkg-config dbus-1 --atleast-version=0.30 ; then
+ AC_DEFINE(DBUS_USE_NEW_API, 1, [Whether to use the new API for DBUS 0.30])
+ fi
+
AC_SUBST(DBUS_CFLAGS)
AC_SUBST(DBUS_LIBS)
rm -f conftest.o
fi
-AC_CONFIG_FILES([Makefile avahi-core.pc doxygen/Makefile doxygen/doxygen.conf avahi-common/Makefile avahi-core/Makefile avahi-daemon/Makefile avahi-discover/Makefile avahi-client/Makefile])
+#
+# Detecting the linux distro for specific things like initscripts.
+#
+AC_ARG_WITH(distro, AC_HELP_STRING([--with-distro=DISTRO], [Specify the Linux distribution to target: One of redhat, suse, gentoo, debian, or slackware]))
+if test "z$with_distro" = "z"; then
+ AC_CHECK_FILE(/etc/redhat-release,with_distro="redhat")
+ AC_CHECK_FILE(/etc/SuSE-release,with_distro="suse")
+ AC_CHECK_FILE(/etc/fedora-release,with_distro="redhat")
+ AC_CHECK_FILE(/etc/gentoo-release,with_distro="gentoo")
+ AC_CHECK_FILE(/etc/debian_version,with_distro="debian")
+ AC_CHECK_FILE(/etc/slackware-version,with_distro="slackware")
+fi
+with_distro=`echo ${with_distro} | tr '[[:upper:]]' '[[:lower:]]' `
+
+if test "z$with_distro" = "z"; then
+ echo "Linux distribution autodetection failed, you must specify the distribution to target using --with-distro=DISTRO"
+ exit 1
+else
+case $with_distro in
+ debian)
+ ;;
+ *)
+ echo "Your distribution (${with_distro}) is not yet supported! (patches welcome)"
+ exit 1
+ ;;
+esac
+
+fi
+AM_CONDITIONAL(TARGET_REDHAT, test x"$with_distro" = xredhat)
+AM_CONDITIONAL(TARGET_SUSE, test x"$with_distro" = xsuse)
+AM_CONDITIONAL(TARGET_GENTOO, test x"$with_distro" = xgentoo)
+AM_CONDITIONAL(TARGET_DEBIAN, test x"$with_distro" = xdebian)
+AM_CONDITIONAL(TARGET_SLACKWARE, test x"$with_distro" = xslackware)
+
+#
+# Defining Avahi User and Group.
+#
+AC_ARG_WITH(avahi_user,[ --with-avahi-user=<user> User for running the Avahi daemon (avahi)])
+if test -z "$with_avahi_user" ; then
+ AVAHI_USER=avahi
+else
+ AVAHI_USER=$with_avahi_user
+fi
+AC_SUBST(AVAHI_USER)
+AC_DEFINE_UNQUOTED(AVAHI_USER,"$AVAHI_USER", [User for running the Avahi daemon])
+
+AC_ARG_WITH(avahi_group,[ --with-avahi-group=<grp> Group for Avahi (avahi)])
+if test -z "$with_avahi_group" ; then
+ AVAHI_GROUP=avahi
+else
+ AVAHI_GROUP=$with_avahi_group
+fi
+AC_SUBST(AVAHI_GROUP)
+AC_DEFINE_UNQUOTED(AVAHI_GROUP,"$AVAHI_GROUP", [Group for Avahi])
+
+AC_CONFIG_FILES([
+Makefile
+avahi-core.pc
+doxygen/Makefile
+doxygen/doxygen.conf
+avahi-common/Makefile
+avahi-core/Makefile
+avahi-daemon/Makefile
+avahi-daemon/avahi-dbus.conf
+avahi-discover/Makefile
+avahi-client/Makefile
+initscript/Makefile
+initscript/Debian/Makefile
+initscript/Debian/15avahi
+])
AC_OUTPUT
+
+dnl ==========================================================================
+echo "
+ $PACKAGE_NAME $VERSION
+ ============
+
+ prefix: ${prefix}
+ sysconfdir: ${sysconfdir}
+ dbus-1 system.d dir: ${DBUS_SYS_DIR}
+ dbus-1 version: `pkg-config dbus-1 --modversion`
+ compiler: ${CC}
+ cflags: ${CFLAGS}
+ Linux Distro: ${with_distro}
+ User for Avahi: ${AVAHI_USER}
+ Group for Avahi: ${AVAHI_GROUP}
+"
+
+echo "NOTE: Remember to create user ${AVAHI_USER} and group ${AVAHI_GROUP} before make install"
+echo
--- /dev/null
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# initscript/Makefile. Generated from Makefile.in by configure.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+srcdir = .
+top_srcdir = ..
+
+pkgdatadir = $(datadir)/avahi
+pkglibdir = $(libdir)/avahi
+pkgincludedir = $(includedir)/avahi
+top_builddir = ..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = i686-pc-linux-gnu
+#am__append_1 = RedHat
+#am__append_2 = Gentoo
+am__append_3 = Debian
+#am__append_4 = Slackware
+#am__append_5 = SUSE
+ACLOCAL = ${SHELL} /home/lennart/projects/flexmdns/missing --run aclocal-1.7
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/lennart/projects/flexmdns/missing --run tar
+AR = ar
+AUTOCONF = ${SHELL} /home/lennart/projects/flexmdns/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/lennart/projects/flexmdns/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/lennart/projects/flexmdns/missing --run automake-1.7
+AVAHI_GROUP = avahi
+AVAHI_USER = avahi
+AWK = gawk
+CC = ccache distcc gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS = -g -O0 -pipe -W -Wall -pedantic -std=c99 -Wno-unused-parameter
+CPP = ccache distcc gcc -E
+CPPFLAGS =
+CXX = ccache distcc g++
+CXXCPP = ccache distcc g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS = -g -O2
+CYGPATH_W = echo
+DBUS_CFLAGS = -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+DBUS_LIBS = -ldbus-glib-1 -ldbus-1 -lglib-2.0
+DBUS_SYS_DIR = /etc/dbus-1/system.d
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+ECHO = echo
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+EGREP = grep -E
+ENABLE_DBUS_FALSE = #
+ENABLE_DBUS_TRUE =
+ENABLE_DOXYGEN_FALSE = #
+ENABLE_DOXYGEN_TRUE =
+ENABLE_GTK_FALSE = #
+ENABLE_GTK_TRUE =
+EXEEXT =
+F77 = g77
+FFLAGS = -g -O2
+GLADE20_CFLAGS = -DXTHREADS -I/usr/include/libglade-2.0 -I/usr/include/gtk-2.0 -I/usr/include/libxml2 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GLADE20_LIBS = -lglade-2.0 -lgtk-x11-2.0 -lxml2 -lpthread -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+GLIB20_CFLAGS = -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GLIB20_LIBS = -lglib-2.0
+GTK20_CFLAGS = -DXTHREADS -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GTK20_LIBS = -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LIBDAEMON_CFLAGS = -D_REENTRANT
+LIBDAEMON_LIBS = -ldaemon
+LIBOBJS =
+LIBS =
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LN_S = ln -s
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/lennart/projects/flexmdns/missing --run makeinfo
+OBJEXT = o
+PACKAGE = avahi
+PACKAGE_BUGREPORT = mzninuv (at) 0pointer (dot) de
+PACKAGE_NAME = avahi
+PACKAGE_STRING = avahi 0.1
+PACKAGE_TARNAME = avahi
+PACKAGE_URL = http://www.freedesktop.org/Software/Avahi
+PACKAGE_VERSION = 0.1
+PATH_SEPARATOR = :
+PKG_CONFIG = /usr/bin/pkg-config
+RANLIB = ranlib
+SET_MAKE =
+SHELL = /bin/sh
+STRIP = strip
+TARGET_DEBIAN_FALSE = #
+TARGET_DEBIAN_TRUE =
+TARGET_GENTOO_FALSE =
+TARGET_GENTOO_TRUE = #
+TARGET_REDHAT_FALSE =
+TARGET_REDHAT_TRUE = #
+TARGET_SLACKWARE_FALSE =
+TARGET_SLACKWARE_TRUE = #
+TARGET_SUSE_FALSE =
+TARGET_SUSE_TRUE = #
+VERSION = 0.1
+ac_ct_AR = ar
+ac_ct_CC = ccache distcc gcc
+ac_ct_CXX =
+ac_ct_F77 = g77
+ac_ct_RANLIB = ranlib
+ac_ct_STRIP = strip
+ac_pt_PKG_CONFIG = /usr/bin/pkg-config
+am__fastdepCC_FALSE = #
+am__fastdepCC_TRUE =
+am__fastdepCXX_FALSE = #
+am__fastdepCXX_TRUE =
+am__include = include
+am__leading_dot = .
+am__quote =
+bindir = ${exec_prefix}/bin
+build = i686-pc-linux-gnu
+build_alias =
+build_cpu = i686
+build_os = linux-gnu
+build_vendor = pc
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host = i686-pc-linux-gnu
+host_alias =
+host_cpu = i686
+host_os = linux-gnu
+host_vendor = pc
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/lennart/projects/flexmdns/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+oldincludedir = /usr/include
+prefix = /usr/local/stow/avahi-0.1
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = /etc
+target_alias =
+SUBDIRS = $(am__append_1) $(am__append_2) $(am__append_3) $(am__append_4) $(am__append_5)
+subdir = initscript
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
+ ps-recursive install-info-recursive uninstall-info-recursive \
+ all-recursive install-data-recursive install-exec-recursive \
+ installdirs-recursive install-recursive uninstall-recursive \
+ check-recursive installcheck-recursive
+DIST_COMMON = $(srcdir)/Makefile.in Makefile.am
+DIST_SUBDIRS = RedHat Gentoo Debian Slackware SUSE
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign initscript/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if (etags --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ else \
+ include_option=--include; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
+
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" \
+ distdir=../$(distdir)/$$subdir \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+ distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
+ clean-generic clean-libtool clean-recursive ctags \
+ ctags-recursive distclean distclean-generic distclean-libtool \
+ distclean-recursive distclean-tags distdir dvi dvi-am \
+ dvi-recursive info info-am info-recursive install install-am \
+ install-data install-data-am install-data-recursive \
+ install-exec install-exec-am install-exec-recursive \
+ install-info install-info-am install-info-recursive install-man \
+ install-recursive install-strip installcheck installcheck-am \
+ installdirs installdirs-am installdirs-recursive \
+ maintainer-clean maintainer-clean-generic \
+ maintainer-clean-recursive mostlyclean mostlyclean-generic \
+ mostlyclean-libtool mostlyclean-recursive pdf pdf-am \
+ pdf-recursive ps ps-am ps-recursive tags tags-recursive \
+ uninstall uninstall-am uninstall-info-am \
+ uninstall-info-recursive uninstall-recursive
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
projects / catta / commitdiff