#
# chkconfig: 2345 46 54
#
-# version: 1.0.4
-# author
: Lubomir Bulej <pallas@kadan.cz>
-# Modified for RPM by Mads Kiilerich <mads@kiilerich.com>
+# version: 1.0.8
+# author
s: Lubomir Bulej <pallas@kadan.cz>
+# Mads Kiilerich <mads@kiilerich.com>
#
-# description: this script takes care of starting and setting up of VPNs \
-# provided by tincd daemon. It parses the configuration files \
-# in all VPN directories and sets up the interfaces and routing
+# description: This script parses tinc configuration files for networks given \
+# in /etc/tinc/nets.boot and for each of the networks it sets up \
+# the interface and static routes and starts the tinc daemon.
#
# processname: tincd
TPIDS=/var/run
#DEBUG=-dddd
+NETSFILE=$TCONF/nets.boot
+
# Check the daemon
if [ ! -x $TINCD ]; then
- echo "**tinc: daemon $TINCD does not exist or is not executable!"
+ echo "**tinc: $TINCD does not exist or is not executable!" >&2
exit
fi
# Check if ip-route is installed
if [ ! -f /sbin/ip ]; then
- echo "**tinc: ip-route utilities not installed!"
+ echo "**tinc: ip-route utilities not installed!" >&2
+ exit
+fi
+
+# Check the kernel
+if ! ip addr &> /dev/null; then
+ echo "**tinc: kernel not configured for use with ip-route!" >&2
exit
fi
# Check the configuration directory
if [ ! -d $TCONF ]; then
- echo "**tinc: configuration directory ($TCONF) not found!"
+ echo "**tinc: configuration directory ($TCONF) not found!" >&2
exit
fi
-
+
+# Check nets.boot
+if [ ! -f $NETSFILE ]; then
+ echo "**tinc: file with list of VPNs to start ($NETSFILE) not found!" >&2
+ exit
+fi
+
+# Load names of networks to be started
+NETS="$(sed -e 's/#.*//; s/[[:space:]]//g; /^$/ d' $NETSFILE)"
+
+
+##############################################################################
+# prefix_to_mask Converts prefix length to netmask
+# eg. 17 -> 255.255.128.0
+# $1 ... prefix
+
+prefix_to_mask () {
+ _MSK=""; _len="$1"
+ for _dot in "." "." "." " "; do
+ if [ ${_len} -ge 8 ]; then
+ _fld=8
+ else
+ _fld="${_len}"
+ fi
+
+ _MSK="${_MSK}$((255 & (255 << (8 - _fld))))${_dot}"
+ _len=$((_len - _fld))
+ done
+
+ echo ${_MSK}
+}
+
+
+##############################################################################
+# mask_to_prefix Converts netmask to prefix length
+# eg. 255.255.192.0 -> 18
+# $1 ... netmask
+
+mask_to_prefix () {
+ _LEN=0; _msk="$1"
+ for _tmp in 1 2 3 4; do
+ _fld=${_msk%%.*}
+ _msk=${_msk#*.}
+
+ while [ ${_fld} -ne 0 ]; do
+ _fld=$(((_fld << 1) & 255))
+ _LEN=$((_LEN + 1))
+ done
+ done
+
+ echo ${_LEN}
+}
+
##############################################################################
# vpn_load () Loads VPN configuration
vpn_load () {
CFG="$TCONF/$1/tinc.conf"
- [ -f $CFG ] || { echo "**tinc: $CFG does not exist!" >&2; return 1; }
+ [ -f $CFG ] || { MSG="$CFG does not exist!"; return 1 }
# load TINCD config
- DEV=`grep -i -e '^[[:space:]]*TapDevice' $CFG | sed 's/[[:space:]]//g; s/^.*=//g'`
- VPN=`grep -i -e '^[[:space:]]*(MyOwnVPNIP|MyVirtualIP)' -E $CFG | head -1 | sed 's/[[:space:]]//g; s/^.*=//g'`
+ DEV="$(grep -i -e '^[[:space:]]*TapDevice' $CFG | sed 's/[[:space:]]//g; s/^.*=//g')"
+ VPN="$(grep -i -e '^[[:space:]]*(MyOwnVPNIP|MyVirtualIP)' -E $CFG | sed 's/[[:space:]]//g; s/^.*=//g')"
+ IFM="$(grep -i -e '^[[:space:]]*VPNMask' $CFG | sed 's/[[:space:]]//g; s/^.*=//g')"
- # discourage empty and multiple entries
+ # TapDevice syntax validation
[ -z "$DEV" ] && \
- { echo "**tinc: TapDevice required!" >&2; return 2; }
- echo $DEV | grep -q '^/dev/tap' ||
- { echo "**tinc: TapDevice should be in form /dev/tapX" >&2; return 2; }
- [ `echo $DEV | wc -l` -gt 1 ] && \
- { echo "**tinc: multiple TapDevice entries not allowed!" >&2; return 3; }
+ { MSG="TapDevice required!"; return 1 }
+ [ $(echo $DEV | wc -l) -gt 1 ] && \
+ { MSG="multiple TapDevice entries not allowed!"; return 1 }
+ echo $DEV | grep -q -x -E '/dev/tap[[:digit:]]+' ||
+ { MSG="TapDevice should be in form /dev/tapX!"; return 1 }
+
+ # MyOwnVPNIP/MyVirtualIP syntax validation
[ -z "$VPN" ] && \
- { echo "**tinc: MyOwnVPNIP/MyVirtualIP required!" >&2; return 2; }
- [ `echo $VPN | wc -l` -gt 1 ] && \
- { echo "**tinc: multiple MyOwnVPNIP/MyVirtualIP entries not allowed!" >&2; return 3; }
- echo $VPN | grep -q -x \
- '\([[:digit:]]\{1,3\}\.\)\{3\}[[:digit:]]\{1,3\}/[[:digit:]]\{1,2\}' || \
- { echo "**tinc: badly formed MyOwnVPNIP/MyVirtualIP address $VPN!"; return 3; }
+ { MSG="MyOwnVPNIP/MyVirtualIP required!"; return 1 }
+ [ $(echo $VPN | wc -l) -gt 1 ] && \
+ { MSG="multiple MyOwnVPNIP/MyVirtualIP entries not allowed!"; return 1 }
+ echo $VPN | grep -q -x -E \
+ '([[:digit:]]{1,3}\.){3}[[:digit:]]{1,3}/[[:digit:]]{1,2}' || \
+ { MSG="badly formed MyOwnVPNIP/MyVirtualIP address $VPN!"; return 1 }
+
+ # VPNMask syntax validation
+ [ $(echo $IFM | wc -l) -gt 1 ] && \
+ { MSG="multiple VPNMask entries not allowed!"; return 1 }
+
+
+ # device & IP address extraction
+ TAP=${DEV##*/}
+ NUM=${TAP#tap}
+ ADR=${VPN%%/*}
+
+ # netmask is calculated from MyVirtualIP netmask prefix length, except when
+ # VPNMask is specified, in which case it is used instead of default prefix
+
+ # VPNMask not specified
+ if [ -z "$IFM" ]; then
+ LEN=${VPN##*/}
+ MSK=$(prefix_to_mask $LEN)
+
+ # VPNMask is prefix length, convert it to netmask for MSK
+ elif echo $IFM | grep -q -x -E '[[:digit:]]{1,2}'; then
+ VPN="$ADR/$IFM"
+ MSK=$(prefix_to_mask $IFM)
+
+ # VPNMask is netmask, convert it to prefix length for VPN
+ elif echo $IFM | grep -q -x -E '([[:digit:]]{1,3}\.){3}[[:digit:]]{1,3}'; then
+ VPN="$ADR/$(mask_to_prefix $IFM)"
+ MSK="$IFM"
+
+ else
+ MSG="badly formed interface netmask (VPNMask=$IFM)!"
+ return 1
+ fi
- # network device
- TAP=`echo $DEV | cut -d"/" -f3`
- NUM=`echo $TAP | sed 's/tap//'`
-
- # IP address, netmask length
- ADR=`echo $VPN | cut -d"/" -f1`
- LEN=`echo $VPN | cut -d"/" -f2`
-
- # Expand bitlength to netmask
- MSK=""; len=$LEN
- for cnt in 1 1 1 0; do
- if [ $len -ge 8 ]; then
- msk=8
- else
- msk=$len
- fi
-
- MSK="$MSK$((255 & (255 << (8 - msk))))"
- [ $cnt -ne 0 ] && MSK="$MSK."
- len=$((len-msk))
- done
# Network & broadcast addresses
- BRD=`ipcalc --broadcast $ADR $MSK | cut -d"=" -f2`
- NET=`ipcalc --network $ADR $MSK | cut -d"=" -f2`
-
+ BRD=$(ipcalc --broadcast $ADR $MSK | cut -d"=" -f2)
+ NET=$(ipcalc --network $ADR $MSK | cut -d"=" -f2)
+
# MAC address
- MAC=`printf "fe:fd:%0.2x:%0.2x:%0.2x:%0.2x" $(echo $ADR | sed 's/\./ /g')`
- # echo "TAP $TAP NUM $NUM ADR $ADR LEN $LEN MSK $MSK BRD $BRD NET $NET MAC $MAC" >&2
+ MAC=$(printf "fe:fd:%0.2x:%0.2x:%0.2x:%0.2x" $(echo $ADR | { IFS=. ; read a b c d; echo $a $b $c $d }))
+
+ # debugging
+ # echo >&2
+ # echo "VPN $VPN TAP $TAP NUM $NUM MAC $MAC IFM $IFM" >&2
+ # echo "ADR $ADR MSK $MSK NET $NET BRD $BRD" >&2
+
return 0
}
# $1 ... VPN to start
vpn_start () {
-
- vpn_load $1 || { echo "**tinc: could not vpn_load $1" >&2; return 1; }
+ MSG=""; ERR=""
+ vpn_load $1 || return 1
# create device file
if [ ! -c $DEV ]; then
fi
# load device module
- { insmod ethertap --name="ethertap$NUM" unit="$NUM" 2>&1 || \
- { echo "**tinc: cannot insmod ethertap$NUM" >&2; return 2; }
- } | grep -v '^Us'
+ ERR="$(insmod ethertap -o "ethertap$NUM" unit="$NUM" 2>&1 1> /dev/null)" ||
+ { MSG="could not insmod ethertap as unit $NUM!"; return 2 }
# configure the interface
- ip link set $TAP address $MAC
- ip link set $TAP up
- ip addr flush dev $TAP 2>&1 | grep -v -x '^Nothing to flush.'
- ip addr add $VPN brd $BRD dev $TAP
+ ERR="$(ip link set $TAP address $MAC 2>&1)" ||
+ { MSG="could not set address for device $TAP!"; return 3 }
+
+ ERR="$(ip link set $TAP up 2>&1)" ||
+ { MSG="could not bring up device $TAP!"; return 3 }
+
+ ERR="$(ip addr add $VPN brd $BRD dev $TAP 2>&1)" ||
+ { MSG="could not set IP address for device $TAP!"; return 3 }
# start tincd
$TINCD --net="$1" $DEBUG || \
- { echo "**tinc: could not start $TINCD" >&2; return 3; }
-
- # default interface route
- # ip route add $NET/$LEN dev $TAP
+ { MSG="could not start daemon for network $1"; return 3 }
- # setup routes
+ # setup custom static routes
/etc/sysconfig/network-scripts/ifup-routes $TAP
return 0
# $1 ... VPN to stop
vpn_stop () {
-
+ MSG=""; ERR=""
vpn_load $1 || return 1
- # flush the routing table
- # ip route flush dev $TAP &> /dev/null
-
# kill the tincd daemon
PID="$TPIDS/tinc.$1.pid"
if [ -f $PID ]; then
dly=0
while [ $dly -le 5 ]; do
[ -f $PID ] || break
- sleep 1; dly=$((dly+1))
+ sleep 1; dly=$((dly + 1))
done
fi
+ # remove stale PID file
[ -f $PID ] && rm -f $PID
fi
# bring the interface down
+ ip addr flush dev $TAP &> /dev/null
ip link set $TAP down &> /dev/null
# remove ethertap module
} # vpn_stop
+# Check if there is anything to start
+if [ ! -z "$1" -a "$1" != "status" -a -z "$NETS" ]; then
+ echo "**tinc: no networks found in $NETSFILE!" >&2
+ exit
+fi
+
+
# See how we were called.
case "$1" in
start)
- for vpn in `ls -1 $TCONF`; do
- echo -n "Bringing up VPN $vpn: "
- vpn_start $vpn && action "" /bin/true
+ for vpn in $NETS; do
+ echo -n "Bringing up TINC network $vpn: "
+ vpn_start $vpn && \
+ success "startup of network $vpn" || \
+ failure "startup of network $vpn"
+ echo
+
+ if [ ! -z "$MSG" ]; then
+ [ ! -z "$ERR" ] && echo "$ERR" >&2
+ echo "**tinc: $MSG" >&2
+ fi
done
touch /var/lock/subsys/tinc
;;
stop)
- for vpn in `ls -1 $TCONF`; do
- echo -n "Shutting down VPN $vpn: "
- vpn_stop $vpn && action "" /bin/true
+ for vpn in $NETS; do
+ echo -n "Shutting down TINC network $vpn: "
+ vpn_stop $vpn && \
+ success "shutdown of network $vpn" || \
+ failure "shutdown of network $vpn"
+ echo
+
+ if [ ! -z "$MSG" ]; then
+ [ ! -z "$ERR" ] && echo "$ERR" >&2
+ echo "**tinc: $MSG" >&2
+ fi
done
rm -f /var/lock/subsys/tinc
status)
echo -n "Configured VPNs: "
- for vpn in `ls -1 $TCONF`; do
+ for vpn in $NETS; do
PID="$TPIDS/tinc.$vpn.pid"
- echo -n "$vpn:"
- if [ -f $PID -a `ps ax | grep "^ *$(cat $PID)" | wc -l` -eq 1 ]
- then
- echo -n "OK "
- else
- echo -n "DEAD "
- fi
+
+ [ -f $PID ] && PID="$(cat $PID)" || PID="-dead-"
+ ps ax | grep "^[[:space:]]*$PID" && STS="OK" || STS="DEAD"
+ echo -n "$vpn:$STS "
done
echo
;;
projects / meshlink / commitdiff