+
+
+ host-name= Set the host name avahi-daemon tries
+ to register on the LAN. If omited defaults to the system host
+ name as set with the sethostname() system call.
+
+
+
+ domain-name= Set the default domain name avahi-daemon
+ tries to register its host name and services on the LAN in. If
+ omitted defaults to ".local".
+
+
+
+ browse-domains= Set a comma separated list of
+ browsing domains (in addition to the default one and those
+ announced inside the default browsing domain). Please note
+ that the user may specify additional browsing domains on the
+ client side, either by setting $AVAHI_BROWSE_DOMAINS to a list
+ of colon separated domains or by adding them to the XDG config
+ file ~/.config/avahi/browse-domains (separated by
+ newlines).
+
+
+
+
+ use-ipv4= Takes a boolean value ("yes" or
+ "no"). If set to "no" avahi-daemon will not use IPv4
+ sockets. Default is "yes".
+
+
+
+ use-ipv6= Takes a boolean value ("yes" or
+ "no"). If set to "no" avahi-daemon will not use IPv6
+ sockets. Default is "yes".
+
+
+
+ allow-interfaces= Set a comma separated list of
+ allowed network interfaces that should be used by the
+ avahi-daemon. Traffic on other interfaces will be ignored. If
+ set to an empty list all local interfaces except loopback and
+ point-to-point will be used.
+
+
+
+ deny-interfaces= Set a comma separated list of
+ network interfaces that should be ignored by avahi-daemon.
+ Other not specified interfaces will be used, unless
+ allow-interfaces= is set. This option takes
+ precedence over allow-interfaces= .
+
+
+
+ check-response-ttl= Takes a boolean value ("yes"
+ or "no"). If set to "yes", an additional security check is
+ activated: incoming IP packets will be ignored unless the IP
+ TTL is 255. Earlier mDNS specifications required this
+ check. Since this feature may be incompatible with newer
+ implementations of mDNS it defaults to "no". On the other hand
+ it provides extra security.
+
+
+
+ use-iff-running= Takes a boolean value ("yes" or
+ "no"). If set to "yes" avahi-daemon monitors the IFF_RUNNING
+ flag bit which is used by some (modern) network drivers to
+ tell user space if a network cable is plugged in (in case of
+ copper ethernet), or the network card is associated with some
+ kind of network (in case of WLAN). If IFF_RUNNING is set
+ avahi-daemon will automatically announce its services on that
+ network. Unfortunately far too many network drivers do not
+ support this flag or support it in a broken way. Therefore
+ this option defaults to "no".
+
+
+
+ enable-dbus= Takes either "yes", "no" or
+ "warn". If set to "yes" avahi-daemon connects to D-Bus,
+ offering an object oriented client API. It is only available
+ if Avahi has been compiled with --enable-dbus in
+ which case it defaults to "yes". "warn" behaves like "yes",
+ but the daemon starts up even when it fails to connect to a
+ D-Bus daemon. In addition, if the connection to the D-Bus
+ daemon is terminated we try to reconnect. (Unless we are in a
+ chroot() environment where this definitely will fail.)
+
+
+
+ disallow-other-stacks= Takes a boolean value
+ ("yes" or "no"). If set to "yes" no other process is allowed
+ to bind to UDP port 5353. This effectively impedes other mDNS
+ stacks from running on the host. Use this as a security
+ measure to make sure that only Avahi is responsible for mDNS
+ traffic. Please note that we do not recommend running multiple
+ mDNS stacks on the same host simultaneously. This hampers
+ reliability and is a waste of resources. However, to not annoy
+ people this option defaults to "no".
+
+
+
+ allow-point-to-point= Takes a boolean value
+ ("yes" or "no"). If set to "yes" avahi-daemon will make use of
+ interfaces with the POINTOPOINT flag set. This option defaults
+ to "no" as it might make mDNS unreliable due to usually large
+ latencies with such links and opens a potential security hole
+ by allowing mDNS access from Internet connections. Use with
+ care and YMMV!
+
+
+
+ cache-entries-max= Takes an unsigned integer
+ specifying how many resource records are cached per
+ interface. Bigger values allow mDNS work correctly in large LANs
+ but also increase memory consumption.
+
+
+
+ clients-max= Takes an unsigned integer. The
+ maximum number of concurrent D-Bus clients allowed. If the
+ maximum number is reached further clients will be refused until
+ at least one existing client disconnects.
+
+
+
+ objects-per-client-max= Takes an unsigned
+ integer. The maximum number of objects (entry groups, browsers,
+ resolvers) that may be registered per D-Bus client at a time. If the
+ maximum number is reached further object creation will be
+ refused until at least one object is freed.
+
+
+
+ entries-per-entry-group-max= Takes an unsigned
+ integer. The maximum number of entries (resource records) per
+ entry group registered by a D-Bus client at a time. If the
+ maximum number is reached further resource records may not be
+ added to an entry group.
+
+
+
+ ratelimit-interval-usec= Takes an unsigned
+ integer. Sets the per-interface packet rate-limiting interval
+ parameter. Together with ratelimit-burst= this may be
+ used to control the maximum number of packets Avahi will
+ generated in a specific period of time on an interface.
+
+
+
+ ratelimit-burst= Takes an unsigned
+ integer. Sets the per-interface packet rate-limiting burst
+ parameter. Together with ratelimit-interval-usec= this may be
+ used to control the maximum number of packets Avahi will
+ generated in a specific period of time on an interface.
+
+
+
+
+
+ disable-publishing= Takes a boolean value
+ ("yes" or "no"). If set to "yes", no record will be published by
+ Avahi, not even address records for the local host. Avahi will
+ be started in a querying-only mode. Use this is a security
+ measure. This option defaults to "no"
disable-user-service-publishing= Takes a boolean value
+ ("yes" or "no"). If set to "yes", Avahi will still publish
+ address records and suchlike but will not allow user
+ applications to publish services. Use this is a security
+ measure. This option defaults to "no"
+ add-service-cookie= Takes a boolean value ("yes"
+ or "no"). If set to "yes" an implicit TXT entry will be added
+ to all locally registered services, containing a cookie value
+ which is chosen randomly on daemon startup. This can be used
+ to detect if two services on two different
+ interfaces/protocols are actually identical. Defaults to
+ "no".
+
+
+
+ publish-addresses= Takes a boolean value ("yes"
+ or "no"). If set to "yes" avahi-daemon will register mDNS
+ address records for all local IP addresses. Unless you want to
+ use avahi-daemon exclusively for browsing it's recommended to
+ enable this. If you plan to register local services you need
+ to enable this option. Defaults to "yes".
+
+
+
+ publish-hinfo= Takes a boolean value ("yes" or
+ "no"). If set to "yes" avahi-daemon will register an mDNS
+ HINFO record on all interfaces which contains information
+ about the local operating system and CPU, which might be
+ useful for administrative purposes. This is recommended by the
+ mDNS specification but not required. For the sake of privacy
+ you might choose to disable this feature. Defaults to
+ "yes."
+
+
+
+ publish-workstation= Takes a boolean value
+ ("yes" or "no"). If set to "yes" avahi-daemon will register a
+ service of type "_workstation._tcp" on the local LAN. This
+ might be useful for administrative purposes (i.e. browse for
+ all PCs on the LAN), but is not required or recommended by any
+ specification. Newer MacOS X releases register a service of
+ this type. Defaults to "yes".
+
+
+
+ publish-domain= Takes a boolean value ("yes" or
+ "no"). If set to "yes" avahi-daemon will announce the locally
+ used domain name (see above) for browsing by other
+ hosts. Defaults to "yes".
+
+
+
+ publish-dns-servers= Takes a comma separated
+ list of IP addresses for unicast DNS servers. You can use this
+ to announce unicast DNS servers via mDNS. When used in
+ conjunction with avahi-dnsconfd on the client
+ side this allows DHCP-like configuration of unicast DNS
+ servers.
+
+
+
+ publish-resolv-conf-dns-servers= Takes a boolean
+ value ("yes" or "no"). If set to "yes" avahi-daemon will
+ publish the unicast DNS servers specified in
+ /etc/resolv.conf in addition to those specified
+ with publish-dns-servers . Send avahi-daemon a
+ SIGHUP to have it reload this file. Defaults to "no".
+
+
+
+ publish-aaaa-on-ipv4= Takes a boolean value
+ ("yes" or "no"). If set to "yes" avahi-daemon will publish an
+ IPv6 AAAA record via IPv4, i.e. the local IPv6 addresses can be
+ resolved using an IPv4 transport. Only useful when IPv4 is
+ enabled with use-ipv4=true . Defaults to "yes".
+
+
+
+ publish-a-on-ipv6= Takes a boolean value
+ ("yes" or "no"). If set to "yes" avahi-daemon will publish an
+ IPv4 A record via IPv6, i.e. the local IPv4 addresses can be
+ resolved using an IPv6 transport. Only useful when IPv6 is
+ enabled with use-ipv6=true . Defaults to "no".
+
+
+
+
+
+ This section is used to define system resource limits for the
+ daemon. See
+
+
+ rlimit-as= Value in bytes for RLIMIT_AS (maximum size of the process's virtual memory). Sensible values are heavily system dependent.
+
+
+
+ rlimit-core= Value in bytes for RLIMIT_CORE (maximum core file size). Unless you want to debug avahi-daemon, it is safe to set this to 0.
+
+
+
+ rlimit-data= Value in bytes for RLIMIT_DATA (maximum size of the process's data segment). Sensible values are heavily system dependent.
+
+
+
+ rlimit-fsize= Value for RLIMIT_FSIZE (maximum size of files the process may create). Since avahi-daemon shouldn't write any files to disk, it is safe to set this to 0.
+
+
+
+ rlimit-nofile= Value for RLIMIT_NOFILE (open file descriptors). avahi-daemon shouldn't need more than 15 to 20 open file descriptors concurrently.
+
+
+
+ rlimit-stack= Value in bytes for RLIMIT_STACK (maximum size of the process stack). Sensible values are heavily system dependent.
+
+
+
+ rlimit-nproc= Value for RLIMIT_NPROC (number of process of user). avahi-daemon forks of a helper process on systems where
+
+
+
+
+