X-Git-Url: http://git.meshlink.io/?a=blobdiff_plain;f=man%2Favahi-daemon.conf.5.xml.in;h=08992fa6f69db4ff4545d5d148383307e8a583a3;hb=acdec2c38860b6bc36328d20f5da6584787a368a;hp=cac071711f5f210f775686271cd2f4de0ec87cfb;hpb=843f5fba386f9787c1562ce02bea42bfdfc09898;p=catta

diff --git a/man/avahi-daemon.conf.5.xml.in b/man/avahi-daemon.conf.5.xml.in
index cac0717..08992fa 100644
--- a/man/avahi-daemon.conf.5.xml.in
+++ b/man/avahi-daemon.conf.5.xml.in
@@ -4,19 +4,19 @@
 
 <!-- $Id$ -->
 
-<!-- 
+<!--
   This file is part of avahi.
- 
+
   avahi is free software; you can redistribute it and/or modify it
   under the terms of the GNU Lesser General Public License as
   published by the Free Software Foundation; either version 2.1 of the
   License, or (at your option) any later version.
- 
+
   avahi is distributed in the hope that it will be useful, but WITHOUT
   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
   or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General
   Public License for more details.
- 
+
   You should have received a copy of the GNU Lesser General Public
   License along with avahi; if not, write to the Free Software
   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
@@ -28,11 +28,11 @@
 	<synopsis>
       <cmd>@pkgsysconfdir@/avahi-daemon.conf</cmd>
 	</synopsis>
-	
+
     <description>
       <p><file>avahi-daemon.conf</file> is the configuration file for avahi-daemon.</p>
 	</description>
-	
+
 	<section name="Section [Server]">
 
       <option>
@@ -42,9 +42,21 @@
       </option>
 
       <option>
-        <p><opt>domain-name=</opt> Set the domain name avahi-domain
+        <p><opt>domain-name=</opt> Set the default domain name avahi-daemon
         tries to register its host name and services on the LAN in. If
-        omited defaults to ".local".</p>
+        omitted defaults to ".local".</p>
+      </option>
+
+      <option>
+        <p><opt>browse-domains=</opt> Set a comma seperated list of
+        browsing domains (in addition to the default one and those
+        announced inside the default browsing domain). Please note
+        that the user may specify additional browsing domains on the
+        client side, either by setting $AVAHI_BROWSE_DOMAINS to a list
+        of colon seperated domains or by adding them to the XDG config
+        file <file>~/.config/avahi/browse-domains</file> (seperated by
+        newlines).</p>
+
       </option>
 
       <option>
@@ -59,6 +71,22 @@
         sockets. Default is "yes".</p>
       </option>
 
+      <option>
+        <p><opt>allow-interfaces=</opt> Set a comma seperated list of
+        allowed network interfaces that should be used by the
+        avahi-daemon.  Other interfaces will be ignored. If set to the
+        empty list all local interfaces except loopback and
+        point-to-point will be used.</p>
+      </option>
+
+      <option>
+        <p><opt>deny-interfaces=</opt> Set a comma seperated list of
+        network interfaces that should be ignored by avahi-daemon.
+	Other not specified interfaces will be used, unless
+	<opt>allow-interfaces</opt> is set. This option takes
+	precedence over <opt>deny-interfaces</opt>.</p>
+      </option>
+
       <option>
         <p><opt>check-response-ttl=</opt> Takes a boolean value ("yes"
         or "no"). If set to "yes", an additional security check is
@@ -83,16 +111,79 @@
       </option>
 
       <option>
-        <p><opt>enable-dbus=</opt> Takes a boolean value ("yes" or
-        "no"). If set to "yes" avahi-daemon connects to DBUS, to offer
-        an object oriented client API. Only available if avahi has
-        been compiled with <opt>--enable-dbus</opt> in which case it
-        defaults to "yes".</p>
+        <p><opt>enable-dbus=</opt> Takes either "yes", "no" or
+        "warn". If set to "yes" avahi-daemon connects to D-Bus,
+        offering an object oriented client API. It is only available
+        if Avahi has been compiled with <opt>--enable-dbus</opt> in
+        which case it defaults to "yes". "warn" behaves like "yes",
+        but the daemon starts up even when it fails to connect to a
+        D-Bus daemon. In addition, if the connection to the D-Bus
+        daemon is terminated we try to reconnect. (Unless we are in a
+        chroot() environment where this definitely will fail.) </p>
+      </option>
+
+      <option>
+        <p><opt>disallow-other-stacks=</opt> Takes a boolean value
+        ("yes" or "no"). If set to "yes" no other process is allowed
+        to bind to UDP port 5353. This effectively impedes other mDNS
+        stacks from running on the host. Use this as a security
+        measure to make sure that only Avahi is responsible for mDNS
+        traffic. Please note that we do not recommend running multiple
+        mDNS stacks on the same host simultaneously. This hampers
+        reliability and is a waste of resources. However, to not annoy
+        people this option defaults to "no".</p>
+      </option>
+
+      <option>
+        <p><opt>allow-point-to-point=</opt> Takes a boolean value
+        ("yes" or "no"). If set to "yes" avahi-daemon will make use of
+        interfaces with the POINTOPOINT flag set. This option defaults
+        to "no" as it might make mDNS unreliable due to usually large
+        latencies with such links and opens a potential security hole
+        by allowing mDNS access from Internet connections. Use with
+        care and YMMV!</p>
       </option>
 
 	</section>
 
+	<section name="Section [wide-area]">
+      <option>
+        <p><opt>enable-wide-area=</opt> Takes a boolean value
+        ("yes" or "no"). Enable wide-area DNS-SD, aka
+        DNS-SD over unicast DNS. If this is enabled only domains
+        ending in .local will be resolved on mDNS, all other domains
+        are resolved via unicast DNS. If you want to maintain multiple
+        different multicast DNS domains even with this option enabled
+        we encourage you to use subdomains of .local, such as
+        "kitchen.local". This option defaults to "yes".</p>
+      </option>
+
+    </section>
+
 	<section name="Section [publish]">
+
+      <option><p><opt>disable-publishing=</opt> Takes a boolean value
+      ("yes" or "no"). If set to "yes", no record will be published by
+      Avahi, not even address records for the local host. Avahi will
+      be started in a querying-only mode. Use this is a security
+      measure. This option defaults to "no"</p></option>
+
+      <option><p><opt>disable-user-service-publishing=</opt> Takes a boolean value
+      ("yes" or "no"). If set to "yes", Avahi will still publish
+      address records and suchlike but will not allow user
+      applications to publish services. Use this is a security
+      measure. This option defaults to "no"</p></option>
+
+      <option>
+        <p><opt>add-service-cookie=</opt> Takes a boolean value ("yes"
+        or "no"). If set to "yes" an implicit TXT entry will be added
+        to all locally registered services, containing a cookie value
+        which is chosen randomly on daemon startup. This can be used
+        to detect if two services on two different
+        interfaces/protocols are actually identical. Defaults to
+        "no".</p>
+      </option>
+
       <option>
         <p><opt>publish-addresses=</opt> Takes a boolean value ("yes"
         or "no"). If set to "yes" avahi-daemon will register mDNS
@@ -148,6 +239,22 @@
         SIGHUP to have it reload this file. Defaults to "no".</p>
       </option>
 
+      <option>
+        <p><opt>publish-aaaa-on-ipv4=</opt> Takes a boolean value
+        ("yes" or "no"). If set to "yes" avahi-daemon will publish an
+        IPv6 AAAA record via IPv4, i.e. the local IPv6 addresses can be
+        resolved using an IPv4 transport. Only useful when IPv4 is
+        enabled with <opt>use-ipv4=true</opt>. Defaults to "yes".</p>
+      </option>
+
+      <option>
+        <p><opt>publish-a-on-ipv6=</opt> Takes a boolean value
+        ("yes" or "no"). If set to "yes" avahi-daemon will publish an
+        IPv4 A record via IPv6, i.e. the local IPv4 addresses can be
+        resolved using an IPv6 transport. Only useful when IPv6 is
+        enabled with <opt>use-ipv6=true</opt>. Defaults to "no".</p>
+      </option>
+
     </section>
 
 	<section name="Section [reflector]">
@@ -206,25 +313,25 @@
       </option>
 
       <option>
-        <p><opt>rlimit-nproc=</opt> Value for RLIMIT_NPROC (number of process of user). Since only a single avahi-daemon process is usually running you can set this safely to 1.</p>
+        <p><opt>rlimit-nproc=</opt> Value for RLIMIT_NPROC (number of process of user). avahi-daemon forks of a helper process on systems where <manref name="chroot" section="2"/> is available. Therefore this value should not be set below 2.</p>
       </option>
 
     </section>
 
 	<section name="Authors">
-	  <p>The avahi developers &lt;@PACKAGE_BUGREPORT@&gt;; avahi is
+	  <p>The Avahi Developers &lt;@PACKAGE_BUGREPORT@&gt;; Avahi is
 	  available from <url href="@PACKAGE_URL@"/></p>
 	</section>
-	
+
 	<section name="See also">
 	  <p>
         <manref name="avahi-daemon" section="8"/>, <manref name="avahi-dnsconfd" section="8"/>
 	  </p>
 	</section>
-	
+
 	<section name="Comments">
 	  <p>This man page was written using <manref name="xml2man" section="1"
 		  href="http://masqmail.cx/xml2man/"/> by Oliver Kurth.</p>
 	</section>
-	
+
   </manpage>